BTF-LIGHTING FCOB COB LED Strip 8W/m 16.4FT DC24V Warm White 2700K CRI 90+ 8mm Width for Indoor Decoration,Mini Touch Dimmer Switch Max3A Silver,DC24V3A Power Supply

?Ultra Bright and Uniform?DC24V 336LEDs/m 16.4FT Warm White 2700K FCOB COB LED Strip. Flip Chip On Board LED strip(FCOB).Adopting high brightness LED as the light source to ensure the brightness while maintaining color consistency.Compared with traditional 5050SMD 3528SMD light strips, COB LED strip dense light-emitting units create a brighter, softer, spotless and more uniform light, avoiding black in the middle area. CRI 90+ ?Easy to Install?Plug play with led strips; Indoor use only. Use come with adhesive tape to fix it to a clean, flat surface. Notes: 1. Please don't stick on the place with metal. 2. Please don't put it on hand to control the LED. Touch Turn on/off : Short Touch the controller , can turn on/off the light. The default maximum brightness when turning on the lights is 100%. ?Adjusting brightness?When long pressing any position of the dimming controller, the brightness of the PWM FCOB single color LED strip will change from 10% to 100%. Keeping touch it again, LED strip will going to dim gradually. When dimming, you can stop touching when the needed brightness is reached so that you can get the desired brightness. ?Note?1. Please do not wire backwards, otherwise the mini dimmer switch controller will overheat and short-circuit. 2. The mini dimmer switch controller voltage depends on PWM FCOB single color LED strip . For example, If use DC24V PWM FCOB single color LED Strip , you should use the DC24V3A 72W power supply to power it. ?Package List?1X 16.4FT COB LED light, 2X Non-Wired Gapless Solderless Connector ,3X LED Strip fixed Clips,1X 20AWG Extension Wires,1XUser manual.1X Touch Dimmer Controller Max3A Silver. 1X DC24V3A Power Supply.