ME LED Light Strip, 16.4ft/5M 300LEDs Waterproof Flexible Color Changing 5050 RGB Lighting Kit, Powered 12V DC, 44 Key Remote Control. For Indoor/Outdoor Decoration

Price: $32.00
Product prices and availability are accurate as of 2018-11-09 01:28:24 EST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

LED STRIP LIGHT
Length: 16.4ft
LED Quantity: 18LED/ft, 300 LEDs
Color: RGB 5050 LED
Viewing angle: 120°
Consumption: 3.6W/ft
Input voltage: 12V DC
Working Current: 5A
Working Temperature: -0°F-140°F
Storage temperature: -40°F-170°F
Water-resistant: IP65

44KEY REMOTE CONTROLLER
Type: 44Key
Input/Output: 12V DC
Max load current: 2A each color
Output: Three CMOS drain-open output
Color: 8 Light Pattern: Quick/Slow/Auto/Flash/3 and 7 color fade change/3 and 7 color jumpy change/RGB increase and decrease control

Package List:
• 1 x 16.4ft 5050 LED Strip Light
• 1 x 44 key IR remote controller
• 1 x 12V5A Power Adapter(with plug)

Note:
1. The product's service voltage is 12V DC. Please do not connect directly without 12V power adapter (included in kit).
2. With an IP65 rating, the LED strip can be used in an outside setting and are water-resistant, but they are not waterproof and are not suitable to be submerged.
3.When using it, the remote controller should direct to the receiver within 5 feet without blocked. In order to avoid damage to the controller, light strip length should be no more than 33ft.
4. Outgoing line should be correctly connected according to wiring diagram provided. Controller's input terminal should be red positive pole, black negative pole. The arrow on controller's output terminal should be consistent withe arrow on light strip. Please do not connect reversely. If light strip is only in blue light and cannot change color, it means that red black line on the input end, the line of output end and light strip are respectively reversely connected. Adjust it to correct connection. it will work properly.

Product Features

All in one kit : Comes with an adapter, a reel of 16.4ft 300 LEDs Waterproof rope light and a mini IR remote. Safe and reliable; Self-adhesive back with better adhesive tape for easy application, Super viscosity and easy installation Cut-table and link-able. Color changing LED Strip Lights can be cut at cut marks, extra connector is required to link them(connector not provided). Its 5M adhesive tape backing can fit many dry flat surface Durable & Waterproof. IP65 Waterproofed. Only LED strips are waterproofed. Remote controller, power adapter and connectors are non-waterproof. Save effort and maintenance costs on changing lights frequently. More than 50000 hours service life Performance Guarantee. Comes with a full 12 month warranty, 30 days money back guarantee. If the power adapter or other accessories do not work, please contact us for help. Connect the load and power lines, make sure all connection right before power switched on; Insure there is no obstacle between the IR controller and the receiver when operating; Take off the plastic sheet of remotes battery before using Energy Efficiency & Safety, 12V low working voltage durable power supply, 5A could support multiple lights as extension. More security and stability extremely low heat

Write a Review